Battlefield DMA Firmware: Javelin Anti-Cheat Explained
DMA Cheats & Hardware
6 min readSeptember 30, 2026

Battlefield DMA Firmware: Javelin Anti-Cheat Explained

Lunar Team

Author

Battlefield DMA cheats have one specific requirement: EA protects its recent games, including Battlefield, with its own kernel-level anti-cheat called Javelin. Not every DMA firmware covers Javelin, and choosing the wrong tier is the most common reason a Battlefield DMA setup fails.

This guide explains what Javelin does, which Battlefield DMA firmware covers it in our lineup, which card suits Battlefield's large lobbies and what the rest of the setup needs. It only describes what our products support and does not claim any Battlefield cheat is permanently undetected.

Battlefield DMA Cheats on LunarCheats

Battlefield DMA cheats from LunarCheats run on a 75T or 100T DMA card with Shield firmware, the tier built for EA Javelin and every Easy Anti-Cheat level. The cheat runs on a second PC, ESP is overlaid on your monitor through a fuser and aim goes through an input box. Nothing cheat-related runs on your Battlefield gaming PC.

Battlefield DMA at a Glance

  • Anti-cheat: EA Javelin, kernel-level
  • Firmware needed: Shield, which covers Javelin
  • Not enough: Basic
  • Only if you also play Valorant or Delta Force: Hook
  • Battlefield DMA card: 100T recommended for large lobbies with vehicles
  • Extras: second PC, fuser, Makcu for aimbot

What Is EA Javelin?

Javelin is EA's in-house anti-cheat. It runs at kernel level alongside Battlefield, which lets it inspect the system, running programs and the devices connected to the PC. Like other kernel anti-cheats, it looks for known cheat signatures and for hardware that doesn't look legitimate.

For Battlefield DMA users, that means the DMA card itself is part of what gets inspected. A card running a public or generic firmware is exposed, and a firmware built only for lighter anti-cheats is not designed for Javelin's checks.

Which Firmware Covers Battlefield?

Our three firmware tiers build on each other:

  • Basic covers BattlEye, Ricochet and low-tier EAC. Does not cover Javelin.
  • Shield covers every EAC tier and Javelin, with full IOMMU support. The right tier for Battlefield.
  • Hook covers everything Shield does, plus Riot Vanguard and ACE.

Battlefield DMA Firmware: Why Shield

Unique 1:1 Emulated Firmware

Shield is a 1:1 emulated firmware, built uniquely for each customer. Your card never shares a signature with other Battlefield players, so there is no public build for Javelin to fingerprint.

Full IOMMU Support

Shield includes full IOMMU support, which matters for kernel anti-cheats that check how devices access memory.

One License, Several Games

Shield costs $449.99 for a lifetime license, with a 30-day warranty. The same firmware also covers Fortnite, Rust and Apex Legends, so a single Shield license serves most popular EAC and Javelin games.

Battlefield DMA Card: Why the 100T

Battlefield lobbies are big. Large maps, many players, tanks, helicopters and destruction all mean a lot of data for ESP to read and draw. The 100T DMA card has a larger FPGA, which gives faster memory reads and smoother Battlefield ESP in full lobbies. A 75T card works on a budget, especially if you mostly track nearby infantry.

Our 100T DMA Package includes the card and all cables, with a mini PC option if you don't have a second computer.

Battlefield DMA ESP in Practice

In Battlefield, ESP is about reading the battlefield rather than chasing kills. Use it to see where enemy squads are pushing, which flank is empty and where vehicles are positioned, so you can hold or move at the right time. Keep the overlay filtered: too many markers in a full lobby make the screen harder to read.

Battlefield DMA Aimbot

Aimbot through DMA needs an input box. The Makcu sends aim corrections to your gaming PC as a regular mouse, with no software on the gaming PC. Keep the FOV small and smoothing high, especially at long range, where impossible tracking is easy to notice.

Battlefield DMA Fuser

A fuser overlays the second PC's ESP on your gaming monitor. Our DMA Fuser supports HDMI 2.1 and DisplayPort, up to 1080p 240 Hz and 1440p 165 Hz. For 1440p 240 Hz or 4K 120 Hz, the 4K Fuser keeps your full refresh rate.

How a Battlefield DMA Setup Works Together

  1. Javelin runs on your gaming PC.
  2. The DMA card, running Shield, presents itself as a legitimate device.
  3. The card reads Battlefield's memory and sends it to your second PC.
  4. The DMA cheat on the second PC builds ESP and aim data.
  5. The fuser overlays the ESP on your monitor.
  6. The Makcu sends aim corrections as normal mouse movement.

Battlefield DMA Mistakes to Avoid

  • Buying Basic firmware. It doesn't cover Javelin.
  • Using a 75T in full lobbies. It works, but a 100T keeps ESP smoother.
  • Ignoring a hardware ban. DMA doesn't remove an existing ban. Our Permanent HWID Spoofer supports every Battlefield title.
  • Long-range snapping. It is the easiest thing to spot in a replay.

What to Check Before Buying Battlefield DMA Hardware

  • Firmware: Shield (or Hook if you also play Vanguard or ACE games).
  • Card: 100T recommended.
  • Fuser matching your monitor's refresh rate.
  • Makcu for aimbot.
  • Shipping: 10 to 14 business days standard, 3 to 5 business days fast.

Compare every tier in our DMA cards and firmware guide.

Battlefield DMA Summary

Battlefield runs EA Javelin, so the firmware is the key decision: Basic isn't built for it, Shield is. Pair Shield with a 100T card for large lobbies, a fuser and a Makcu, and use Battlefield ESP to read pushes and flanks rather than to force impossible shots.

Battlefield DMA Cheats FAQ

Does Basic firmware work for Battlefield DMA?

No. Basic covers BattlEye, Ricochet and low-tier EAC, not EA Javelin. Battlefield needs Shield or Hook.

Do I need Hook for Battlefield?

No. Shield covers Javelin. Hook is only needed if you also play Valorant or Delta Force.

75T or 100T for Battlefield DMA?

A 100T is recommended for full lobbies with vehicles. A 75T works on a budget.

Can one Shield license cover Battlefield and Fortnite?

Yes. Shield covers Javelin and every EAC tier, including Fortnite, Rust and Apex Legends.

Are Battlefield DMA cheats guaranteed undetected?

No setup is guaranteed forever. Javelin updates regularly. Shield is tested against the latest updates and has a 30-day warranty, but safe play still matters.

More DMA Guides

Everything in this guide works with the Universal DMA cheat. Related reading: Fortnite DMA Firmware: Which One Works With EAC in 2026?, Delta Force DMA Setup: Which Firmware Works With ACE? and Valorant DMA Firmware: What You Need to Get Past Vanguard (2026).

Enjoying our content?

Check out our store for the latest products and explore what we have to offer.